75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 1 1 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 features ? single stage, single ended ? 3 to 5 v operation ? low current, 50 ma ? 20 db flat gain ? 1.2 db nf noise ? low distortion performance ? lead - free sot - 89 plastic package ? halogen - free green mold compound ? rohs* compliant description the maal - 011136 is an rf amplifier assembled in a sot - 89 plastic package. this amplifier provides 20 db of flat gain while biased from 3 to 5 volts. the amplifier provides excellent noise figure. the maal - 011136 provides high gain, low noise and low distortion making it ideally suited as input stage for fiber - to - the - home (ftth) applications and other 75 infrastructure applications. the maal - 011136 is fabricated using gaas phemt technology. ordering information 1,2 part number package maal - 011136 - tr1000 1000 part reel maal - 011136 - tr3000 3000 part reel maal - 011136 - 001smb sample board * restrictions on hazardous substances, european union directive 2011/65/eu. 1. reference application note m513 for reel size information. 2. all sample boards include 5 loose parts. functional schematic pin no. pin name function 1 rf in rf input 2 gnd ground 3 rf out rf output /drain supply pin configuration
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 2 2 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 electrical specifications: t a = 25c, v dd = 5 v, z 0 = 75 absolute maximum ratings 3,4,5,6 3. exceeding any one or combination of these limits may cause permanent damage to this device. 4. macom does not recommend sustained operation near these survivability limits. 5. these operating conditions will ensure mttf > 1 x 10 6 hours. 6. junction temperature (t j ) = case temperature (t c ) + ? jc*(v*i) typical thermal resistance ( ? jc ) = 67c/w. a) for t c = 25c, t j = 42c @ 5 v, 53 ma b) for t c = 85c, t j = 103c @ 5 v, 53 ma handling procedures please observe the following precautions to avoid damage: static sensitivity integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these hbm class 1a. parameter absolute maximum input power 10 dbm operating voltage 6 volts operating temperature - 40c to +85c storage temperature - 65c to +150c parameter test conditions units min. typ. max. gain 45 - 1218 mhz db 19 20.5 22 gain flatness 45 - 1218 mhz db +/ - 0.2 reverse isolation 45 - 1218 mhz db 25 input return loss 45 - 1218 mhz db 10 output return loss 45 - 1218 mhz db 16 noise figure 45 - 1218 mhz 1218 mhz db 1.2 1.2 1.6 output ip2 45 - 1200 mhz, tone spacing 6 mhz, p out per tone = 4 dbm dbm 43 output ip3 45 - 1200 mhz, tone spacing 6 mhz, p out per tone = 4 dbm dbm 32 p1db 45 - 1218 mhz dbm 17.5 composite triple beat, ctb 79 channels, 0 db tilt, 18 dbmv per channel output, qam to 1000 mhz dbc - 79 composite second order, cso 79 channels, 0 db tilt, 18 dbmv per channel output, qam to 1000 mhz dbc - 62 i dd v dd = 5 v ma 53 62
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 3 3 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 parts list, v dd = 5 v component value package c1 - c4 10 nf 0402 c5 1.5 pf 0402 c6 1000 pf 0402 c7 1.0 pf 0402 l1 6.2 nh 0402 l2 6.8 nh 0402 l3 ferrite bead 7 0402 l4 68 nh 8 0402 r1 8.06 k 0402 r2 931 0402 r3 464 0402 r4 1.54 k 0402 r5 8.06 k 0402 r6 19.1 0402 recommended pcb layout 7. murata, part number blm15hd182sn. 8. coilcraft, part number 0402cs - 68nxjlw recommended pcb land pattern schematic including off - chip components c7 60 vias beneath package 0.012 in. via diameter c1 c5 l1 r1 c2 r2 r3 l4 l2 c6 r4 r6 l3 c3 r5 c4 c7 u1 vdd
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 4 4 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 typical performance curves : v dd = 5 v reverse isolation to 3 ghz gain to 1.218 ghz gain to 3 ghz input return loss to 1.218 ghz noise figure to 1.218 ghz output return loss to 1.218 ghz
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 5 5 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 5 typical performance curves : v dd = 5 v ctb 79 analog channels + qam, 0 db tilt, p out = 18 dbmv per channel cso lower 79 analog channels + qam, 0 db tilt, p out = 18 dbmv per channel cso upper 79 analog channels + qam, 0 db tilt, p out = 18 dbmv per channel
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 6 6 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 6 lead free sot - 89 ? ? reference application note s2083 for lead - free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. plating is 100% matte tin over copper. all dimensions shown as inches/mm
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 7 7 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 7 typical performance: t a = 25c, v dd = 3 v, z 0 = 75 parameter test conditions units min. typ. max. gain 45 - 1218 mhz db 20.5 gain flatness 45 - 1218 mhz db +/ - 0.2 reverse isolation 45 - 1218 mhz db 25 input return loss 45 - 1218 mhz db 10 output return loss 45 - 1218 mhz db 16 noise figure 45 - 100 mhz 100 - 1218 mhz db 1.2 1.2 output ip2 45 - 1200 mhz, tone spacing 6 mhz, p out per tone = 4 dbm dbm 42 output ip3 45 - 1200 mhz, tone spacing 6 mhz, p out per tone = 4 dbm dbm 32 p1db 45 - 1218 mhz dbm 16.5 composite triple beat, ctb 79 channels, 0 db tilt, 18 dbmv per channel output, qam to 1000 mhz dbc - 79 composite second order, cso 79 channels, 0 db tilt, 18 dbmv per channel output, qam to 1000 mhz dbc - 62 i dd v dd = 3 v ma 53 applications section 3 v application the maal - 011136 may also be operated from 3 v v dd supply with adjustment of two bias resistors: r4 = 4.64 k to set current at nominal 53 ma; and r6 = 0 .
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 8 8 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 8 typical performance curves : v dd = 3 v reverse isolation to 3 ghz gain to 1.218 ghz gain to 3 ghz input return loss to 1.218 ghz noise figure to 1.218 ghz output return loss to 1.218 ghz
75 catv, fttx low noise amplifier 45 - 1218 mhz rev. v1 maal - 011136 9 9 macom technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information co ntained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 9 macom technology solutions inc. all rights reserved. information in this document is provided in connection with macom technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
